Vandy Vape are well known for multiple ranges including the Pulse, Jackaroo, Berserker and Kylin.

What Does The Vandy Vape BIIO Have To Offer?

The latest offering is a Pod Kit that is slightly more advanced than the basic starter kit.

Looking first at the basics it has a 1000mah internal battery which is charged via the USB Type C port at 1A.

The power limits are 5-35W and as this has Variable Wattage adjustment you can set that output to suit the pod installed.

A very pretty 0.96in colour TFT screen wraps around the front of the mod and it appears to have changeable colour theme options.

I am unsure if the airflow is adjustable or fixed. All I can find is the description below and the specs just say “side airflow intake”.

This uses fixed coil pods – meaning that the coil is not replaced, you simply discard the pod component and replace with a new one. A little more waste than a replaceable coil device but less waste than a disposable vape.

A side fill port allows you to add up to 2ml of your own e-liquid to the pod.

There are two pod versions available, 0.6ohm Mesh and 0.8ohm Mesh. You get both included in the kit.

You can choose from 6 colours: Frost Silver, Jazz Blue, Obsidian Black, Cherry Pink, Shadow Black and Marine Blue.

Kit Includes

• Vandy Vape BIIO device
• 0.6ohm pod
• 0.8ohm pod
• USB Type C cable
• User manual

Vandy Vape BIIO Specs

• Size: 114x25x15mm
• Battery: 1000mAh (internal)
• Display: 0.96in colour TFT screen
• Output: 5-35W
• Modes: Variable wattage
• Type C USB charging – 1A charge rate
• Resistance range: Not specified
• Capacity: 2ml
• Compatibility: Not specified
• Side airflow intake
• Top fill

Unfortunately it is difficult to work out whether the airflow is adjustable for this kit and there are no downloadable instructions to see. I would hope on a more advanced pod kit like this the airflow should be adjustable? If it wants to compete with the likes of the OXVA Xlim I would expect adjustable airflow.

Let me know your thoughts on the Vandy Vape BIIO in the comments below!

The post Vandy Vape BIIO Kit Preview – Xlim Rival? Not Quite… appeared first on Ecigclick.

So far we have had the Pulse AIO, Pulse AIO.5 and the Pulse AIO Mini kits. What does the V2 have to offer?

What To Expect From The Vandy Vape Pulse AIO V2…

The “AIO” stands for “All In One”. Meaning the tank, battery and chipset all live in the same housing.

This is a weeny little kit – it is even smaller than the Pulse AIO Mini!

You will need a single 18650 battery (which is not included) and the output is adjustable for Wattage or Voltage from 5-80W (0.5-6V). Plus there are temperature control / TCR and Bypass user modes to play with.

It is worth noting there is no USB port on here, you will need an external charger. This does also mean there will be no firmware updates.

This is very customisable with plenty of replaceable parts – from the side panels, buttons to the button housings. You will just need a T5 screwdriver bit to disassemble.

You can 3D print your own parts – Vandy Vape will even give you blueprints – download them here!

The circuit board is IP67 rated for water resistance just in case you get any e-liquid leaks. Not to mention the whole device can be dismantled for cleaning.

To reduce internal resistance, the battery positive connection is connected directly to the circuit board.

The internal drip tip is adjustable to grip the tank contacts and the battery contact is adjustable too.

Inside the drip tip are airflow outlet restrictor pipes, there are 3 sizes included in the kit. You also get 2 drip tip sleeves – White and Black.

Included in the kit is the Pulse AIO V2 RBA – which is basically a tank with a removable rebuildable deck.

The deck is designed like a “Bridge” (a universal tank base which allows use of different types of coil or stock coils). It is compatible with any BORO tank.

It has 2 posts with recesses to allow access for cutting the coil legs.

On the deck there are replaceable airflow inlet pipes, there are 4 sizes to choose from to restrict the incoming airflow from the honeycomb inlets.

A side fill port allows you to fill with up to 6ml of your own e-liquid.

A 510 adaptor is included to allow you to build the deck and provide power whilst building. This just screws into the mod to bypass the tank section.

Here is an introduction from the co-designer – Tony B.

There are 6 colours to choose from: Black, Klein Blue, Violet, Red, Celeste and Sakura Pink.

Kit Includes

• Vandy Vape Pulse AIO V2 device
• 4x airflow pipes
• 510 building adaptor
• 2x drip tip
• RBA
• Accessory bag
• 3x drip tip airflow pipe
• User manual

Vandy Vape Pulse AIO V2 Specs

• Size: 51×77.3×23.4mm
• Output: 5-80W (0.5-6V)
• Battery: Single 18650 (not included)
• User modes: VW, VV, TC, TCR, Bypass
• Display: 0.42in OLED screen
• Resistance Limits: 0.05-3ohm
• RBA capacity: 6ml
• Side fill port
• IP67 circuit board waterproof rating
• DIY customisation options
• Replaceable key switch circuit board
• 3D printable replaceable panels
• Replaceable drip tips and drip tip restrictor pipes
• Honeycomb airflow
• Single coil build deck
• 4x replaceable deck airflow restrictor pipes
• Adjustable battery and tank contacts

A lot of clever design features have been included on this kit!

I would like to know if the device is compatible with other Boro tanks? This is not mentioned on Tony’s video or the Vandy Vape website?

Anyway do you think that they have thought of everything with the new Vandy Vape Pulse AIO V2 Kit? Let me know in the comments below!

The post Vandy Vape Pulse AIO V2 Kit Preview – Have They Thought Of Everything? appeared first on Ecigclick.

The Jackaroo range have so far included the original single battery Jackaroo mod to the Dual Jackaroo mod, the Jackaroo pod kit and the internal battery Jackaroo Mini.

What To Expect From The Vandy Vape Jackaroo 18650 Pod…

The Jackaroo range gained a great reputation for being rugged devices.

And the Jackaroo 18650 Pod is no exception – being IP67 rated Waterproof, Shock Proof and Dust Proof.

If you are thinking we have already seen a Jackaroo pod kit – you would be right! However that version had a 2000mAh internal battery. This time – as the name suggests – the new version uses a 18650 removable battery.

With the main difference being out of the way, the only other upgrade I notice is that the charging rate via the USB Type C port is now 2A (despite the fact the graphic below says “1A” – the specifications do state 2A).

This has a variable wattage output and you can select from 5 to 70W and a screen displays all of your vaping data.

The pod uses the existing removable VVC coils – it does not state which coils are included in the kit – only the fact you get 2 of them!

There are 5 Mesh coils to choose from: VVC-15 (0.15ohm), VVC-30 (0.3ohm), VVC-60 (0.6ohm), VVC-90 (0.9ohm) and VVC-120 (1.2ohm). As you can see there is quite a range of resistances to suit MTL, RDL and DTL vapers!

If a device promises to satisfy different vaping styles then it will need a method of airflow adjustment! This is provided by a rotating ring located just below the mouthpiece. Also there are two drip tips (mouthpieces) supplied to suit MTL and DTL vaping.

A top fill port allows for easy filling with up to 4.7ml of your own e-liquid. I have not seen a 2ml TPD version mentioned as yet.

There are 6 colours to choose from: Obsidian Black, Carbon Fibre Black, Starry Blue, Gilding, Fantasy Violet and Smoke-ink Ash.

Kit Includes

• Vandy Vape Jackaroo 18650 Pod device
• 2x VVC coil
• Spare parts bag
• MTL drip tip
• USB Type C cable
• User manual

Vandy Vape Jackaroo 18650 Pod Specs

• Size: 114.7×45.2×28.2mm
• Battery: 1×18650 (not included)
• Display: Screen – size and type not specified
• Output: 5-70W
• Modes: Variable wattage
• Type C USB charging – 2A charge rate
• Resistance range: 0.1-3ohm
• Capacity: 4.7ml
• Coils: VVC coil range
• Adjustable top airflow
• Top fill
• IP67 Waterproof, Dust proof and Shock proof

I hope this version performs as well as the rest of the range, the removable battery might entice more people to try the pod version!

What do you think of the Vandy Vape Jackaroo 18650 Pod kit? Let me know in the comments below!

The post Vandy Vape Jackaroo 18650 Pod Preview – Removable Battery Version! appeared first on Ecigclick.

The “BSKR” is short for “Berserker” a popular range of Mouth To Lung (MTL) rebuildable atomisers which include the MTL RDA, Mini MTL RTA and various updates.

What To Expect From The Vandy Vape BSKR Mini V3 MTL RTA…

This is an RTA (Rebuildable Tank Atomiser) and is the Mini version of the existing Berserker V3 RTA.

This is designed for MTL vaping – which means a more restrictive but precise airflow and is compatible with thinner e-liquids with higher nicotine strengths.

One of the best features of this appears to be the ability to adjust the capacity. From what I can make out – there are two tank glass sizes, which you combine to obtain a 2ml (Short tube size) or 4ml (Long tube size) capacity. Also you can use the Steel Tube if you want something more robust!

Also another great feature is the ability to control the flow rate of the e-liquid. This is useful for different thicknesses of e-liquid (VG / PG Ratio) and also in different temperatures the flow rate can change.

To achieve the flow rate adjustment there are 3 different juice control rings included in the kit.

The drip tip (Mouthpiece) has a slim diameter to replicate the sensation of smoking. Plus you even get 4 different styles of tip in the kit. If none of these are to your liking the drip tip adaptor can be removed and the tank will accommodate standard 510 drip tips.

Filling is taken care of via a screw off top cap to get access to the fill ports.

Oh and most important – is the build deck! This looks to be the familiar Berserker 2-post simple style.

When it comes to airflow this has replaceable airflow tubes. You get 7 in the kit – each with a different diameter airflow hole – to reduce or increase airflow. There is no further adjustment.

If all the above isn’t enough for you – the kit even includes some of the excellent Vandy Vape Superfine MTL Fused Clapton Coils (which I buy myself for my RDA’s!)

There are 5 colours to choose from: Matte Black, Stainless Steel (SS), Frosted Grey, Gun Metal and Gold.

Kit Includes

• Vandy Vape BSKR Mini V3 MTL RTA (Short tube installed)
• Long tube glass
• Steel tank
• Accessory bag
• Airflow pipe accessory bag
• 2x Superfine 0.74ohm fused Clapton coils
• Drip tip accessory bag
• User manual

Vandy Vape BSKR Mini V3 MTL RTA Specs

• Size: 22×34.3mm (Short tube size) / 22x43mm (Long tube size)
• Capacity: 2ml (Short tube size) / 4ml (Long tube size)
• 4 drip tip options included
• Juice control rings x3 included
• Top fill
• Additional tank / tube to increase capacity included
• 7 replaceable airflow pipe restrictors included
• Single coil build deck
• 510 drip tip fitting

There are so many excellent features combined in this so called “mini” RTA – I love the look of it.

Is the Vandy Vape BSKR Mini V3 MTL RTA an example of everything you would like on a MTL RTA? Let me know in the comments below!

The post Vandy Vape BSKR Mini V3 MTL RTA Preview – How Many Features?!?! appeared first on Ecigclick.

These two have collaborated before with the Requiem RTA, Widowmaker RTA, Widowmaker RDA and the Requiem BF Kit.

What To Expect From The Vandy Vape Requiem Mod

This is a single battery box mod which is apparently compatible with atomisers of 28mm or less.

You will need 1x 18650 or 21700 battery – these are not included in the kit. If using a 18650, a battery adaptor is included in the kit. You install the battery into the base via the screw off battery cap.

Output wise this is specified as 5-95W (0.5-6V) and you have Variable Wattage, Variable Voltage, Bypass and Temperature Control user modes to play with.

You can view all of your vaping data on the 0.96in TFT colour Screen and there are some natty features such as being able to rotate the screen, adjust the brightness and change theme colour.

A USB Type C port is provided for charging and this will allow between 0.8-1A charge rate.

The clear portion of the device is made of Polycarbonate and the battery tube is made from Anodised Aluminium to keep things light and strong.

Here is an introduction video from the co-designer El Mono Vapeador (it is in Spanish – but you can bring up English Subtitles).

There are 5 colours to choose from: Clear Black Gold, Clear Red, Clear Black, Clear Blue and Ultem.

Kit Includes

• Vandy Vape Requiem Mod
• 18650 battery adaptor (battery not included)
• User manual
• QC USB Type C cable

Vandy Vape Requiem Mod Specs

• Size: 43.9x30x95mm
• Battery: 1×21700 / 18650 (not included)
• Display: 0.96in TFT colour screen
• Output: 5-95W (0.5-6V)
• User modes: Variable Wattage, Variable Voltage, Temperature Control and Bypass
• Type C USB charging – 0.8-1A charge rate
• Resistance range: Not specified
• Ergonomic grip
• Lightweight and Corrosion resistant
• Compatible with tanks of 28mm diameter or below
• Upgraded Vandy Chip chipset

The Vandy Vape Requiem Mod definitely looks to be a comfortable design with plenty of features.

Do you think you might grab one? Let me know your thoughts in the comments below!

The post Vandy Vape Requiem Mod Preview – Clearly One To Watch! appeared first on Ecigclick.

So far the range has consisted of the Pulse BF, Pulse 80W, Pulse X, Pulse Dual, Pulse AIO, Pulse AIO.5 and Pulse AIO Mini.

More Details On The Vandy Vape Pulse III Mod…

One thing most of the range have in common (apart from the AIO) is that they are Squonk mods. We tell you what that means in our Guide To Squonking!

So inside the mod you will find an updated squonk bottle which is said to be easier to fill. Sadly the capacity of this is not stated, but you get two in the kit.

Another great feature is that all of the panels are replaceable.

You can even download the Blueprint so you can design and 3D print your own panels. Or you can choose from a range of panels available separately from Vandy Vape.

You can power this with either a single 21700 battery or using the battery adaptor a 18650. Obviously the batteries are not included.

A waterproof Vandy Chip gives you Variable Wattage, Temperature Control and Bypass user modes.

The maximum output is 95W which I assume is achievable with a 21700 battery only.

A screen is provided to view your vaping data but the size is not specified.

If you need to charge the battery in the mod a USB Type C port with a 1A charging rate is located below the adjustment buttons.

There are 6 colours to choose from: Black, Frosted Blue, Jelly Yellow, Frosted Black, Frosted Purple and Mint Green.

Kit Includes

• Vandy Vape Pulse III Squonk mod
• 18650 battery adaptor (battery not included)
• 2x squonk bottles (Black and White)
• QC USB Type C cable
• User manual

Vandy Vape Pulse III Squonk Mod Specs

• Size: 52.5×92.5×26.2mm
• Battery: 1×21700 / 18650 (not included)
• Squonk bottle capacity: Not specified
• Display: Screen – size not specified
• Output: 5-95W (0.5-6V)
• User modes: Variable Wattage, Bypass, TC
• Type C USB charging – 1A charge rate
• Resistance range: 0.05-3ohm
• Temperature control range: 200-600°F / 100-315°C
• 510 connection
• Waterproof Vandy chipset
• Replaceable panels – Blueprints provided for custom printing
• Easy fill squonk bottle – 2 included in kit

I like the idea of being able to dress up your mod in whatever clothes you want! Plus it is handy if your panels are looking worn and you can spruce it up easily.

Let me know what you think of the Vandy Vape Pulse III Squonk mod in the comments below!

The post Vandy Vape Pulse III Squonk Mod Preview – Easy Fill Squonk Bottle! appeared first on Ecigclick.

So far the range includes the original Kylin RTA followed by the Kylin V2, Kylin M (Mesh), Kylin AIO Kit, Kylin Mini V2 and the Kylin M Pro.

What To Expect From The Vandy Vape Kylin V3 RTA…

This is a RTA (Rebuildable Tank Atomiser) and has a few more features than just the average.

This version has had some upgrades to the airflow – at both ends of the spectrum – inlet and outlet!

The deck is an upgrade to the Kylin 2 with Honeycomb airflow outlets. However for the V3 these outlets are increased below the coil and to the sides of the coil.

The airflow inlets are now at the top of the tank – above the e-liquid level. This design prevents e-liquid leaks from the airflow inlets. Plus you can adjust the incoming airflow to your preference.

You can use either single or dual coil builds on here with the coil clamp screws located below the deck for ease of access.

The capacity is a whopping 6ml and you get a spare bubble glass included in the kit. I have not seen a TPD Compliant 2ml version mentioned as yet.

A screw off top cap gives access for filling the tank. Also there is Juice Control so you can adjust the flow according to your e-liquid.

The kit contents are generous giving you everything you need to get up and running apart from cotton and e-liquid!

There are 5 colours to choose from: Matte Black, Stainless Steel (SS), Rainbow, Gun Metal and Frosted Grey.

Kit Includes

• Vandy Vape Kylin V3 RTA
• Spare glass
• Accessory bag
• Coil lead cutting guide
• 2x Triple fused Clapton coils
• User manual

Vandy Vape Kylin V3 RTA Specs

• Size: 25x37mm
• Capacity: 6ml
• Top adjustable airflow inlets – prevents leaking
• Honeycomb deck airflow outlets
• Single / dual coil deck
• Top fill cap
• Juice control

I know people who used the Kylin as their first RTA and got great performance – so I hope this version can provide the same experience.

Let me know what you think of the Vandy Vape Kylin V3 RTA in the comments below!

The post Vandy Vape Kylin V3 RTA Preview – Hello Old Friend! appeared first on Ecigclick.

The range started with the Requiem BF (Bottom Feed) Squonk kit, then there was the Requiem RDA which had a few tweaks. Following on from that was the PR SE based on the Pulse range of kits with a Requiem RDA.

What To Expect From The Vandy Vape Requiem RTA…

This is a RTA (Rebuildable Tank Atomiser) and is designed to be versatile for different vaping styles.

It is rare to see an atomiser that promises to satisfy MTL (Mouth To Lung), DTL (Direct To Lung) and RDL (Restricted Direct Lung) vaping styles. We tell you what these mean in our Guide To Vape Styles.

Often when an atomiser promises so much it can fall short when it comes to delivery!

However there are interchangeable components here to help achieve that goal.

For instance the tank section is interchangeable, you get 3 tanks included which are designed for each vaping style. The airflow, chimney and juice channels are tailored to match each style.

Plus you have 2 top cap options which have the wider 810 drip tip or the thinner 510 drip tip included.

On each tank section is a side airflow inlet which changes size according to which option you are using. You also have an airflow control ring to finely tune this to your preference.

The deck is designed for a single coil built with 2 simple posts. A coil installation guide tool is provided too which will help with coil positioning.

There are 4 colours to choose from: Stainless Steel (SS), Matte Black, Matte Black Red and Frosted Grey.

Kit Includes

• Vandy Vape Requiem RTA
• MTL Drip Tip
• Accessory bag
• MTL top cap
• MTL cap
• RDL cap
• 2x fused Clapton coils
• User manual

Vandy Vape Requiem RTA Specs

• Size: 24×40.75mm
• Capacity: 4.5ml
• 3 sets of airflow and chimney set ups for MTL, RDL and DTL
• Side adjustable airflow inlets
• MTL, RDL and DTL top cap and 510 / 810 drip tips included
• Single coil deck
• Screw top fill cap

I know when atomisers promise to cover all vaping styles they often fall short, however this time I believe this could be possible due to the fact you change a lot of the components?

Anyway what do you think of the Vandy Vape Requiem RTA? Tell me in the comments below!

The post Vandy Vape Requiem RTA Preview – 3 In 1? appeared first on Ecigclick.

The Pulse family were co-designed by the vape reviewer Tony B and have a range of kits to choose from including the original Pulse BF Squonk, Pulse 80W, Pulse X and Pulse Dual.

What To Expect From The Vandy Vape Pulse AIO Mini Kit…

This is a “Boro” compatible AIO (All In One) box style kit.

Boro are a style of tanks used in a lot of the box AIO devices – originally for the Billet Box. There are many types available and the fact this is compatible means you have plenty to explore!

However included in the kit (depending on version) you can have the Vessel 2 DIY RBA and/or the Vessel Pre-made (stock coil) tank.

The Stock coil tank is compatible with the Vandy Vape VVC coil range and there are 2 coils included in the standard kit. It doesn’t say which coils though!

The Vessel 2 DIY RBA features a single coil build deck and adjustable bottom airflow control.

Capacity wise this varies the RBA pod will hold 4.6ml and the stock coil pod is 5ml. I have not seen 2ml versions mentioned yet for sale in TPD regulated areas? Both pods have a side fill port.

To power the mod you will need a single 18650 battery which is not included.

There is a USB type C port for charging at a 1A charge rate.

The output is specified as 5-80W (0.5-6V) and you have Variable Wattage, Variable Voltage, Temperature Control, Bypass and Smart user modes.

An adjustable 510 connection is provided to allow for adjustments for different tanks.

You can customise this by replacing the buttons and side panels – which you should be able to buy separately.

There are Round and Square buttons included in the kit and the matching panels too.

You can also download the drawings for the side panels if you wanted to make your own!

The main mod body is made from Lexan EXL1414T which is apparently reinforced.

Here is an introduction video by co-designer Mike Vapes.

There are 6 colour options to choose from: Black, Frosted Blue, Frosted Black, Frosted Purple, Jelly Yellow and Mint Green.

Kit Includes

• Vandy Vape Pulse AIO Mini device
• Pulse Vessel 2 RBA tank (kit available without this if required)
• Pulse Vessel stock coil tank
• 2x VVC coil
• 2x Ni80 0.4ohm coils (RBA version kit)
• Accessory bag
• Bonus round button set
• Wrench
• Accessory bag
• Type C USB cable
• Coil lead cutting guide (RBA version kit)
• User manual

Vandy Vape Pulse AIO Mini Specs

• Size: 52x92x26.2mm
• Output: 5-80W (0.5-6V)
• Battery: 1×18650
• User modes: VW, VV, TC, Bypass, Smart
• Display: Screen size not specified
• Resistance Limits: 0.05-3ohm
• E-liquid capacity: 4.6ml (RBA pod) / 5ml (stock coil pod)
• USB Type C Charging – 1A charge rate
• Compatible with Boro tanks
• 510 drip tip
• Round and square buttons
• Adjustable 510 pin
• Material: Lexan EXL1414T Polycarbonate reinforced design
• Stock coil pod compatible with VVC coils
• Single coil Vessel 2 RBA pod with curved 180° airflow, adjustable bottom airflow
• Customise buttons and panels
• Side fill port

I love the look of this and it is very versatile with plenty of user modes, compatibility with other Boro tanks and the fact you can customise it!

Let me know your thoughts on the Vandy Vape Pulse AIO Mini in the comments below!

The post Vandy Vape Pulse AIO Mini Kit Preview – Still Boro Compatible! appeared first on Ecigclick.

The Pulse range were co-designed by the vape reviewer Tony B and have plenty of kits to choose from including the original Pulse BF Squonk, Pulse 80W, Pulse X and Pulse Dual.

What To Expect From The Vandy Vape Pulse AIO.5…

Why is there such a quick update? The original Pulse AIO is not that old?

Apparently there have been issues with the 510 connection on the top of the mod and this update is to address that problem.

A new frame has been produced with a metal section surrounding the 510 connector to make it sturdier and hopefully unlikely to crack.

Also updated is the fire button, you get a square and a round button setup included in the kit.

All previous accessories are compatible plus this is still Boro tank friendly.

Battery wise this is powered using a single 18650 (with included adaptor), 20700 or 21700 and the maximum output is 80W.

Depending on which kit version you choose there are 2 tank options from Vandy Vape. Of course you can use other Boro compatible tanks in here.

If you purchase the RBA version you will get the Vessel RBA tank and the Stock Coil tank. For the non RBA version you will only get the Stock Coil tank.

The stock coil tank is compatible with the VVC coil range – which you also get 2 of in the kit – but the resistance of the coils is not specified.

If you have the RBA version, the tank has a single coil build deck with adjustable 180° wrap around airflow. Plus you even get 2 coils included in the kit.

Pretty much everything else is the same with a USB Type C port for charging at 1A charge rate.

Plus Variable Wattage, Variable Voltage, Temperature Control, Bypass and Smart Modes to choose from.

There are 6 colour options to choose from: Black, Frosted Blue, Frosted Black, Frosted Red, Frosted White and Frosted Green.

Kit Includes

• Vandy Vape Pulse AIO.5 device
• Pulse Vessel RBA tank (kit available without this if required)
• Pulse Vessel stock coil tank
• 2x VVC coil
• 2x Ni80 0.4ohm coils (RBA version kit)
• 18650 battery adaptor (battery not included)
• Bonus round button set
• Wrench
• Accessory bag
• Type C USB cable
• Coil lead cutting guide (RBA version kit)
• User manual

Vandy Vape Pulse AIO.5 Specs

• Size: 97.5×55.6×28.2mm
• Output: 5-80W
• Battery: 1×18650 / 21700 or 20700 (not included)
• User modes: VW, TC, Bypass, Smart
• Display: Screen size not specified
• Resistance Limits: 0.05-3ohm
• Material: Lexan EXL1414T Polycarbonate reinforced design
• E-liquid capacity: 3.7ml (RBA pod) / 5ml (stock coil pod)
• USB Type C Charging – 1A charge rate
• Compatible with Boro tanks
• 510 drip tip
• Update frame with metal interface for 510 nut
• Round and square buttons
• Compatible with Pulse AIO components
• Adjustable 510 pin
• Stock coil pod compatible with VVC coils
• Single coil Vessel RBA pod with curved 180° airflow, adjustable bottom airflow
• Customise buttons and panels
• Side fill port

I always applaud manufacturers who act on customer feedback, it is a shame the original version had issues but I am pleased Vandy Vape have been quick to update this.

Let me know your thoughts on the Vandy Vape Pulse AIO.5 Kit in the comments below!

The post Vandy Vape Pulse AIO.5 Kit Preview – Stronger Frame & Metal 510 Connection appeared first on Ecigclick.