Previous Manto kits include the Manto X Mesh, Manto S, Manto Max and the AIO series which we have not reviewed.

What To Expect From The Rincoe Manto AIO Plus 2…

This is an update to the previous Manto AIO Plus – you can see the comparison below.

This is an AIO device which stands for “All In One”. In this design the tank and battery all live in the same housing.

You will need a single 18650 battery which is not supplied and the device will output from 10-80W.

Inside the mod is the new Manto 2.0 chip which provides both Variable Wattage and Smart user modes.

If you need to charge the battery in an emergency there is a 1A USB Type C port provided.

You get a digital display – but the size is not specified, plus there is an LED indicator located on the circuit board showing through the front panel.

Remove the rear panel to get access to the battery and tank.

Talking of the tank, this is compatible with existing Manto coils and you have the option of purchasing the kit with the RBA coil included.

The Manto coil range consists of the Mesh 0.15ohm coil and the Mesh 0.3ohm coil. Both coils are included in either kit.

There is an airflow adjustment wheel on the base of the tank to tailor the airflow restriction to your preference.

A side fill port is located behind the mod rear panel and the tank will hold up to 3.5ml of your own e-liquid.

Here is a short introduction video from the Rincoe-Official YouTube channel.

There are 4 colour options to choose from: Black, Green, Blue and Orange.

Kit Includes

You can buy the full kit (includes RBA) or without RBA.

Full Kit

• Rincoe Manto AIO Plus 2
• Cartridge / tank
• 0.3ohm Mesh coil (installed)
• 0.15ohm Mesh coil
• USB Type C cable
• Manto AIO RBA coil
• Accessories
• User manual

Without RBA

• Rincoe Manto AIO Plus 2
• Cartridge / tank
• 0.3ohm Mesh coil (installed)
• 0.15ohm Mesh coil
• USB Type C cable
• User manual

Rincoe Manto AIO Plus 2 Specs

• Size: 82.5×47.2×27.6mm
• Output: 10-80W (4.2V Max)
• Battery: Single 18650 (not included)
• User modes: VW, Smart
• Efficiency: 95%
• Display: Digital display – size not specified, LED indicator
• Resistance Limits: 0.1-3ohm
• E-liquid capacity: 3.5ml
• USB Type C Charging – 1A charge rate
• Compatible with all Manto AIO coils
• Manto 2.0 chipset
• RBA coil available in full kit or to purchase separately
• Bottom adjustable airflow
• Side fill port

This looks to be full of features and the option of a RBA coil does indeed make life interesting. The design is a bit “out there” – so I am not 100% sure what I think of it!

Anyway let me know (in the comments below) if the Rincoe Manto AIO Plus 2 is your style of device or whether it makes your eyes hurt a bit!

The post Rincoe Manto AIO Plus 2 Preview – Very Striking!! appeared first on Ecigclick.

There will also be a V1 and V2 version on the way!

More Information About The Rincoe Jellybox V3…

This version has a more futuristic appearance than the other two in the range.

The most striking feature is the LED indicator which is a kind of 3 pronged circle with an arrow above.

This changes colour to denote the battery charge remaining and any fault conditions.

As for the battery capacity – it is 750mAh – the same as the V1. If you want a larger battery go for the V2 at 850mAh.

Like the rest of the range the device will automatically select the appropriate output between 10 to 16 Watts depending on the resistance of the pod installed.

A Type C USB port is provided which allows charging at up to a 0.6A rate.

This uses the new “V” pod range from Rincoe which is also compatible with the V1 and V2.

There are 2 resistance options to choose from – 0.8ohm and 1ohm. Both are mesh coils and you get the 0.8ohm included in the kit.

Refilling is taken care of with the side fill port and it will hold up to 3ml of your own e-liquid. There is no 2ml version for TPD regulated areas shown at time of writing.

There are 5 colour options to choose from: Black Clear, Blue Clear, Purple Clear, Matcha Clear and Amber Clear.

Kit Includes

• Rincoe Jellybox V3 device
• Jellybox V Pod – 0.8ohm
• Lanyard
• USB Type C cable
• User manual

Rincoe Jellybox V3 Specs

• Size: 71.5×48.5×16.5mm
• Battery: 750mAh (internal)
• Display: LED indicator
• Output: 10-16W – adjusts output automatically to suit pod resistance
• Type C USB charging – 0.6A charge rate
• Resistance range: 0.3-3 ohm
• Capacity: 3ml (standard)
• Pods: Fixed coil refillable pods
• Compatible with V Cartridge pods – 0.8ohm and 1ohm Mesh coils
• MCU chipset
• Side fill

I think this is the most striking design of the range and my favourite!

What do you think? Let me know your first impressions of the Rincoe Jellybox V3 in the comments below!

The post Rincoe Jellybox V3 Preview – Striking Transparent Design appeared first on Ecigclick.

There will also be a V1 and V3 version on the way!

What To Expect From The Rincoe Jellybox V2…

This has more of a box styling than the V1 which is a standard Bar shape.

It has an 850mAh internal battery and charges at a 0.6A charge rate via the USB Type C port. This has the largest battery capacity in the “V” range.

Output wise the device will select the appropriate output depending on the pod installed from 10 to 16W.

An LED indicator light changes colour to display the battery charge remaining and other device status information.

The pod is where the coil and e-liquid live and you can fill this with up to 3ml via the side fill port. I have not seen any mention of a 2ml capacity version for marketing in TPD Regulated areas such as the UK.

The “V” pods are compatible with the V1 and V3 devices too.

There are 0.8ohm and 1ohm fixed Mesh coil versions, you only get the 0.8ohm included in the kit. The pod is disposed of when the performance becomes poor or tastes burnt.

There are 5 colour options to choose from: Blue Clear, Matcha Clear, Amber Clear, Black Clear and Full Clear.

Kit Includes

• Rincoe Jellybox V2 device
• Jellybox V Pod – 0.8ohm
• Lanyard
• USB Type C cable
• User manual

Rincoe Jellybox V2 Specs

• Size: 75x41x16mm
• Battery: 850mAh (internal)
• Display: LED indicator
• Output: 10-16W – adjusts output automatically to suit pod resistance
• Type C USB charging – 0.6A charge rate
• Resistance range: 0.8-3 ohm
• Capacity: 3ml (standard)
• Pods: Fixed coil refillable pods
• Compatible with V Cartridge pods – 0.8ohm and 1ohm Mesh coils
• MCU chipset
• Auto draw activation
• Side fill

The styling is different to the V1 but this version does have the largest battery capacity of the range.

What are your thoughts on the Rincoe Jellybox V2? Let me know in the comments below!

The post Rincoe Jellybox V2 Preview – Time For Round 2 ! appeared first on Ecigclick.

There will also be a V2 and V3 version on the way!

More Details On The Rincoe Jellybox V1…

The Rincoe Jellybox V1 is the most orthodox of the 3 newly released pod kits with a standardised bar shaped format.

It consists of 2 main components – the device (mod) and tank (pod).

The pod contains the coil which heats up the e-liquid to create vapour. The coil is fixed so when the performance becomes poor or tastes burnt you discard the pod section and replace with a new one.

A great feature of the pod is the fact it is compatible with the Jellybox V1, V2 and V3. You can choose from 2 versions – 0.8ohm Mesh and 1ohm Mesh. The kit includes the 0.8ohm pod only.

A side fill port on the pod allows you to fill it with up to 3ml of your own e-liquid. I have not seen a 2ml version for TPD regulated areas as yet.

Looking at the main device now, this has a 750mAh battery with a 0.6A USB Charging rate.

The output is controlled by the mod – it will automatically set the power output between 5-16W depending on the resistance of the pod.

Also the device has plenty of protections to keep you safe.

An LED indicator light will change colour to display the battery charge remaining.

There are 5 colour options: Blue, Orange, Green, Grey and Red.

Kit Includes

• Rincoe Jellybox V1 device
• Jellybox V Pod – 0.8ohm
• Lanyard
• USB Type C cable
• User manual

Rincoe Jellybox V1 Specs

• Size: 79.5x28x15.5mm
• Battery: 750mAh (internal)
• Display: LED indicator
• Output: 10-16W – adjusts output automatically to suit pod resistance
• Type C USB charging – 0.6A charge rate
• Resistance range:  0.8-3 ohm
• Capacity: 3ml (standard)
• Pods: Fixed coil refillable pods
• Compatible with V Cartridge pods – 0.8ohm and 1ohm Mesh coils
• MCU chipset
• Side fill

I like the simplicity and the fact the pods are compatible with the rest of the V Range. I assume this has an “Auto Draw” vaping system – but it is not mentioned on the website or specs?

Anyway let me know your thoughts on the Rincoe Jellybox V1 in the comments below!

The post Rincoe Jellybox V1 Preview – Ready For This Jelly? appeared first on Ecigclick.

This family has grown rapidly – even over the last few weeks there have been 3 new kits – the Jellybox F, Jellybox W and Jellybox Lite. The range started with 2 box mods – the Jellybox and Jellybox Mini!

What To Expect From The Rincoe Jellybox Z Kit…

This is a standard pod kit with a refillable pod and a battery section (mod).

The design is similar to the original Jellybox, it is transparent but not fully transparent as there is a patterned interior panel.

Inside the mod is a 850mAh battery which is charged via the USB Type C port at up to 0.6A charge rate.

Output wise this is specified as 10-15W but the device automatically selects the correct output according to the coil installed.

I am not sure if there is any kind of battery indicator – the page for this is pretty sparse with info!

To vape you simply inhale on the mouthpiece and the auto draw sensor does its thing and fires up the device for you.

Moving on to the pod – this uses the coil from the Jellybox Nano kit and is also compatible with the rest of the new Jellybox pod kits.

There is only the 1ohm coil available which is suitable for this kit. You can buy a 0.5ohm coil but as the resistance limits of this kit are 1-3ohm it will not work.

You get one of the 1ohm coils in the kit.

The pod will hold up to 2ml of your own e-liquid and you refill via the side located fill port.

There are 5 colour options to choose from: Full Clear, Black Clear, Blue Clear, Amber Clear and Matcha Clear.

Kit Includes

• Rincoe Jellybox Z device
• 1ohm coil
• Pod
• USB Type C cable
• User manual

Rincoe Jellybox Z Kit Specs

• Size: 73x39x15.5mm
• Output: 10-15W – auto adjusts output
• Battery: 850mAh (internal)
• Display: Not specified
• Resistance range: 1-3ohm
• USB Type C – 0.6A charge rate
• Pods: Refillable, replaceable coils
• Coils : 1ohm mesh, Compatible with Jellybox Nano coil
• Capacity: 2ml
• Draw activated
• Side fill port

I like the fact that the new Jellybox pod range all use coils which are compatible with a lot of other devices. Plus the low price makes this very interesting!

Let me know your thoughts on the Rincoe Jellybox Z Kit in the comments below!

The post Rincoe Jellybox Z Kit Preview – Yep Another Jellybox! appeared first on Ecigclick.

The range started initially with 2 Box Mods – the Jellybox and Jellybox Mini, and now there a are quite a few pod kits as well including the Jellybox W, Jellybox F, Jellybox Nano and Jellybox SE.

What To Expect From The Rincoe Jellybox Lite Kit…

Although the Jellybox Pod Kit range look very different they have one main thing in common.

They all use the “Jellybox Nano” mesh coils. Most of the kits are compatible with the 1ohm coil, but the Lite version is also compatible with the 0.5ohm coil. You get both of these in the kit!

This kit is designed to please Mouth To Lung (MTL) and Direct To Lung (DTL) vapers – we tell you what these terms mean in our Guide To Vape Styles.

So in order to cater to very different resistance coils the device will adjust the output automatically to suit. The power range is specified as 10-26W.

Inside the main device is a 850mAh battery and this is charged via the USB Type C port at up to 0.8A charge rate.

On the main banner for this kit there is a mention of an “Air-flow control system” but I have not seen any details about this sadly.

Looking now at the pod section, this is refillable with up to 2.6ml of your own e-liquid – I have not seen a 2ml TPD compliant version listed though.

A bottom fill port is provided and you can replace the coils to keep the maintenance costs low.

There are 5 colour options to choose from: Yellow, Blue, Grey, White and Green.

Kit Includes

• Rincoe Jellybox Lite device
• 1ohm coil
• 0.5ohm coil
• Lanyard
• Pod
• USB Type C cable
• User manual

Rincoe Jellybox Lite Kit Specs

• Size: 25.5x98mm
• Output: 10-26W – auto adjusts output
• Battery: 850mAh (internal)
• Display: LED indicator
• Resistance range: 0.3-3ohm
• USB Type C – 0.8A charge rate
• Pods: Refillable, replaceable coils
• Coils : 1ohm mesh, 0.5ohm mesh, Compatible with Jellybox Nano coil
• Capacity: 2.6ml
• Draw activated
• Bottom fill port

This seems to be the “top of the range” device in the Jellybox pod family with the bigger battery and higher output.

Let me know what you think of the Rincoe Jellybox Lite Kit in the comments below!

The post Rincoe Jellybox Lite Kit Preview – Funky New Pod Kit! appeared first on Ecigclick.

The family includes pod kits and even box mods with the Jellybox and Jellybox Mini!

More Details On The Rincoe Jellybox W Kit…

There are a ruck of new Jellybox pod kits on the way – which I will cover in other previews – but we are focusing on the Jellybox W kit here.

This takes the form of a Vape Pen / Pod kit hybrid, the shape is that of a vape pen but the tank is replaced with a pod.

The pod is removable and refillable with up to 2ml of your own e-liquid and has a side fill port.

It uses the Nano range of coils which are also compatible with the new Jellybox kits on the way plus the Jellybox F, Jellybox SE, Jellybox Nano X and the original Jellybox Nano.

Included in the kit is the 1ohm Jellybox Nano coil which has a mesh element and organic cotton wicking.

Inside the main device is a 700mAh battery which you charge using the USB Type C port at up to 0.6A charge rate.

There are no adjustments to make as the device senses the coil resistance and selects the correct output between 10-15W.

Also to make it even simpler is the fact this has auto draw activation – so you don’t even have to press any buttons to get it to fire!

There are 5 colour options to choose from: White, Black, Green, Blue and Red.

Kit Includes

• Rincoe Jellybox W device
• 1ohm coil
• Pod
• USB Type C cable
• User manual

Rincoe Jellybox W Kit Specs

• Size: 21×91.5mm
• Output: 10-15W – auto adjusts output
• Battery: 700mAh (internal)
• Display: LED indicator
• Resistance range: 1-3ohm
• USB Type C – 0.6A charge rate
• Pods: Refillable, replaceable coils
• Coils : 1ohm mesh, Compatible with Jellybox Nano coil
• Capacity: 2ml
• Draw activated
• Side fill port

Again this looks to be a very simple starter kit and it is great that the coils are compatible with other devices in the range!

What are your thoughts on the new Rincoe Jellybox W Kit? Let me know in the comments below!

The post Rincoe Jellybox W Kit Preview – Jellybox – Pen Style! appeared first on Ecigclick.

There are another 4 new Jellybox kits coming soon – I will cover them in different previews!

What To Expect From The Rincoe Jellybox F Kit…

This is designed to be a simple pod kit which is highly compatible with other Jellybox pod kits.

The coils are removable and are also compatible with the new Jellybox kits on the way plus the Jellybox SE, Jellybox Nano X and the original Jellybox Nano.

It is worth noting though this is only compatible with the 1ohm coil as the minimum resistance this device can use is 1ohm.

Anyway you get a 1ohm Mesh coil included in the kit!

The output is specified as 10-15W and the device will automatically adjust the output to suit the coil installed.

Inside the body is a 650mAh battery which is charged at up to 0.6A via the USB Type C port.

You don’t need to worry about any buttons or adjustments as this will fire automatically when you inhale on the mouthpiece.

The refillable pod will hold up to 2ml of your own e-liquid and a side fill port is provided.

There is no mention of any battery indication – I hope there is something!

There are 5 colour options to choose from: Full Clear, Black Clear, Blue Clear, Amber Clear and Matcha Clear.

Kit Includes

• Rincoe Jellybox F device
• 1ohm coil
• Pod
• USB Type C cable
• User manual

Rincoe Jellybox F Kit Specs

• Size: 76.8x28x15.8mm
• Output: 10-15W – auto adjusts output
• Battery: 650mAh (internal)
• Display: Not specified
• Resistance range: 1-3ohm
• USB Type C – 0.6A charge rate
• Pods: Refillable, replaceable coils
• Coils : 1ohm mesh, Compatible with Jellybox Nano coil
• Capacity: 2ml
• Draw activated
• Side fill port

If you click on the link I think you will be surprised how inexpensive this little kit, plus having removable coils makes it cheap to maintain too!

Let me know your thoughts on the Rincoe Jellybox F Kit in the comments below!

Oh and watch out for more new kits in this range!

The post Rincoe Jellybox F Kit Preview – No Need To Be Jelly… appeared first on Ecigclick.

As mentioned above the Jellybox range is growing – including the original 228W Jellybox, Jellybox Mini, Jellybox Nano and the new Jellybox Nano X.

More Details On The Rincoe Jellybox SE Kit…

As you can see this is sort of a rectangle style pod kit – in comparison with the Nano pods which are a small square shape.

The 3 main components of any pod kit are the battery (or mod), pod (or tank) and coil.

Looking at the mod component first – this has an internal 500mAh battery which is charged via USB Type C at up to 0.5A charge rate. This could be classed as a slow charging rate but the battery isn’t huge so should still be pretty quick.

Output wise this is stated as 10-13W and an LED indicator is provided to view the battery capacity remaining. I assume as there is no power adjustment the 13W is when the battery is fully charged and perhaps the lower 10W limit is when the battery is discharged? Just me guessing though!

Sadly there is not much detail on this kit on the Rincoe website but from what I can see it looks to be an “Auto draw” device rather than a button firing.

The body is transparent – which matches most of the Jellybox range with an internal pattern layer.

The pod uses removable coils and the coil appears (don’t quote me!) to be the same as the 1ohm mesh included in the other Nano kits. As the minimum resistance allowed is 0.8ohm the Nano 0.5ohm mesh coil is not compatible.

You use your own e-liquid in this pod and it holds up to 2.8ml – no mention of a TPD Compliant 2ml version though as yet.

The fill port appears to be on the side of the pod and accessible with the pod installed.

There are 5 colour options to choose from: Raijin, Alien, Wargs, Skull and Tiger.

Kit Includes

• Rincoe Jellybox SE Device
• 1ohm Mesh coil
• Pod
• Type C USB cable
• User manual

Rincoe Jellybox SE Kit Specs

• Size: 24.5x19x79mm
• Output: 10-13W (3.2-4.2V)
• Battery: 500mAh (internal)
• Display: LED Indicator
• Resistance range: 0.8-3ohm
• E-liquid capacity: 2.8ml
• USB Type C – 0.5A charge rate
• Pods: Refillable replaceable coils
• Coils: 1ohm Mesh
• Side fill port

Not much really to say with this kit – it is a simple to use pod kit with the added bonus of replaceable coils!

What are your thoughts on the Rincoe Jellybox SE Kit? Let me know in the comments below!

The post Rincoe Jellybox SE Kit Preview – Ready For This Jelly? appeared first on Ecigclick.

So far the range has included the original Nano, Jellybox Mini and Jellybox 228W kit.

What To Expect From The Rincoe Jellybox Nano X Kit…

The Jellybox Nano X kit is based on the original Jellybox Nano and to be honest only the styling appears to have changed.

The original Nano was a see through small pod kit – whereas the Nano X has removable side panels in different designs.

The rest of the specs seem the same and even the coils are compatible with the kit including both the 0.5ohm mesh and the 1ohm mesh coils.

As stated above the coils are replaceable and the pod is refillable with up to 2.8ml of your own e-liquid. I have not seen a TPD Compliant 2ml version mentioned as yet.

The pod sits in the mod (or battery) component which contains a 1000mAh battery with a USB Type C charging port which is charged at a 1A charge rate.

An LED indicator changes colour to display the battery capacity remaining.

The output is stated as 10-30W and the mod adjusts the wattage automatically to suit the coil installed.

This has an “auto draw” firing system which basically means you inhale on the mouthpiece and the sensor will trigger the device to fire.

A great addition is the small airflow control system to tailor the airflow to your preference.

Also a cute lanyard is included in the kit to keep your vape handy at all times.

There are 7 options to choose from: Snakeman, Tiger, Raijin, Skull, Carbon Black, Wargs and Alien.

Kit Includes

• Rincoe Jellybox Nano X Device
• 1ohm Mesh coil
• 0.5ohm Mesh coil
• Pod
• Lanyard
• Type C USB cable
• User manual

Rincoe Jellybox Nano X Kit Specs

• Size: 54x68x19mm
• Output: 10-30W (3.2-4.2V)
• Battery: 1000mAh (internal)
• Display: LED Indicator
• Resistance range: 0.3-3ohm
• E-liquid capacity: 2.8ml
• USB Type C – 1A charge rate
• Pods: Refillable replaceable coils
• Coils: Jellybox Nano coil range
• Replaceable magnetic side panels
• Auto draw
• Auto wattage adjustment
• Adjustable airflow

So the Jellybox Nano has basically just had a facelift and the decorative panels are removable!

Let me know your thoughts on the Rincoe Jellybox Nano X Kit in the comments below!

The post Rincoe Jellybox Nano X Kit Preview – Who Wants A Box Of Jelly? Yummy! appeared first on Ecigclick.