This family includes the Neptune X and the original Neptune Pod.

What To Expect From The iJoy Neptune 2 Pod Kit…

As mentioned above this is a pod kit so you should expect plenty of simplicity without sacrificing flavour!

The two main components of the kit are the mod (or battery section) and the Pod where the coil and e-liquid live.

The pods are refillable with up to 2ml of your own e-liquid via the side fill port and are supposedly leak-proof.

Inside the pod is the 0.8ohm mesh coil however this is not removable. When the coil performance has deteriorated you remove the pod and replace with a new one – no faffing about changing coils.

The mod component houses a 650mAh battery which is recharged via the USB Type C port but the charge rate and time are not specified.

Output wise this is not specified however it does say it has a “Bypass” output, which basically means that the battery will output full power. This is sometimes annoying as when the battery charge depletes the output will gradually drop in power.

Sadly the iJoy website is not very informative and there is no mention of any kind of indicator to display battery charge or fault conditions.

The designs on the mod body are covered with a glass cover to protect the finish.

There are 5 colour options to choose from: Tech, Peacock, Lava, Beast and Tiger.

Kit Includes

• iJoy Neptune 2 mod
• Pod
• User manual

iJoy Neptune 2 Pod Kit Specs

• Size: 99x27x12mm
• Output: Bypass
• Battery: 650mAh (internal)
• Display: LED indicator
• Resistance range: Not specified
• USB Type C
• Pods: Refillable, fixed coils
• Coils : 0.8ohm Mesh
• Capacity: 2ml
• Side fill port

I do wish the iJoy website was a bit more informative, I have no idea if this is draw or button activated, charging rate or time and if there is any kind of indication system?

What do you think of the iJoy Neptune 2 Pod Kit? Let me know in the comments below!

The post iJoy Neptune 2 Pod Kit Preview – Out Of This World? appeared first on Ecigclick.

iJoy have been on the vape scene for a long time and have plenty of pod kits in their range including the Captain AirGo, Aria Pro, Neptune X and the Jupiter.

What Is New For The iJoy Luna 2 Pod Kit?

There have been a few great upgrades for the Luna 2 – the first is that the battery capacity has increased from 350mAh to 650mAh.

You still get a USB Type C charge port with a 1A charge rate and the device is controlled by the UNIV.Mini chipset with plenty of protections.

Auto draw activation is provided for a button free operation.

Also upgraded is the output which has gone from 11W to 16W which also matches up with the lower resistance pod coil.

As with the original the pods have fixed coils so when the coil performance has deteriorated you dispose of the pod – no messy coil changes to contend with.

The original pods had a 1.1ohm resistance but these have been replaced with the new 0.8ohm mesh pod.

The fill capacity has increased massively from 1.4ml to 3ml on the standard Luna 2 Kit. For TPD regulated areas this is likely to be reduced to 2ml.

There are 4 colours to choose from : Red, Green, Blue and Black.

Kit Includes

• iJoy Luna 2 mod
• Luna 2 Pod
• USB Type C cable
• User manual

iJoy Luna 2 Pod Kit Specs

• Size: 12.5×22.5x109mm
• Output: 16W / 3.6V
• Battery: 650mAh
• Capacity: 3ml
• Display: LED indicator
• Resistance range: Not specified
• USB Type C port – 1A charge rate
• Pods: Refillable, fixed coil
• Coils: 0.8ohm Mesh
• Side fill port
• Draw activated fire
• UNIV.MINI chipset

Some great improvements here which should hopefully make this a great starter kit.

Let me know your first impressions on the iJoy Luna 2 pod kit in the comments below!

The post iJoy Luna 2 Pod Kit Preview – Out Of This World? appeared first on Ecigclick.

A few of the Captain devices have been pod kits – including the Captain Link and Captain 1500 but mainly they have been box mods with sub ohm tank setups.

What To Expect From The iJoy Captain AirGo Pod Kit…

Basically this is marketed as being a military grade “Tri-Proof” kit.

The “Tri-proof” statement is due to the fact the device has an IP68 Water, shock and Dust Proof rating. Therefore should be pretty rugged to carry around.

Considering the mod is only 14mm thick this does contain some surprising features!

For a start the pod capacity is 5.5ml! Which seems huge – this may of course be reduced to 2ml if iJoy want to sell the kit in TPD Regulated areas. A fill port is located on the bottom of the pod.

Also the battery capacity is 930mAh – which is bigger than a lot of pod kits, plus you can recharge this at a 1.5A charge rate using the USB Type C port.

The operation is super simple as all you need to do is inhale on the mouthpiece and the sensor will trigger the fire function. Or if you prefer you can manually press the fire button.

Somewhere they have managed to squeeze in the UNIV Pro 3.0 chipset – which is an update to the large UNIV chips found on full size box mods.

Output wise this has a constant 3.5V / 15W output which is not adjustable.

From what I can tell the coil is replaceable and there is only a 0.8ohm mesh coil available. iJoy predict the coil will last through around 16-22ml worth of e-liquid.

There are 6 colour options to choose from: Black, Orange, Army Camo, Blue Camo, Red and Blue.

Kit Includes

• iJoy Captain AirGo device
• Pod
• AirGo 0.8ohm mesh coil
• USB Type C Cable
• User manual

iJoy Captain AirGo Pod Kit Specs

• Size: 88x50x14mm
• Output: 3.5V (15W)
• Battery:  930mAh (internal)
• Display: LED Indicator
• Resistance range: Not specified
• Material: Aluminium Alloy, PCTG, Leather
• E-liquid capacity: 5.5ml
• USB Type C port – 1.5A charge rate
• Pods: Refillable, fixed 0.8ohm Mesh coil – 16-22ml coil lifespan prediction
• IP68 waterproof, dustproof
• Bottom fill pod
• UNIV Pro3.0 chipset
• Auto draw or button activation

This is a tough looking kit despite its delicate proportions!

Let me know your thoughts on the iJoy Captain AirGo Pod Kit in the comments below!

The post iJoy Captain AirGo Pod Kit Preview – The Captain Is Looking Slimmer? appeared first on Ecigclick.

This range has had all sorts – from Mods (Captain PD1865, Captain V2, Captain X3), RTA tanks (Captain Elite RTA) and even Pod mods (Captain 1500).

What To Expect From The iJoy Captain Link…

Like the Captain 1500 this kit is a type of Pod Kit – but also a standard box mod and tank!

The reason this kit is a combo of the two types is the fact that the mod has a standard 510 connector (like a box mod) however it is supplied with a Pod Tank (like a pod kit!).

Included in the kit is a 510 adaptor which magnetically connects to the pod and provides a bottom airflow adjustment and the 510 connection to use on the Captain Link mod.

The mod itself uses a single battery – either a 21700 or with the included adaptor a 18650.

Output wise this is specified as 5-100W but I assume the full 100W would be with a 21700 battery.

There are 3 user modes to choose from – Variable Wattage, Temperature Control and TCR and the UNIV S 2.0 chipset is the brains of the device.

A 0.69in colour screen displays all of your vape data and a Type C USB port is provided for emergency charging at a 1A (or 1.5A – both are mentioned!) charge rate.

The pod has a bottom fill port – accessed by disconnecting the pod from the 510 adaptor.

You can replace the coils too and two coils are included in the kit:

• L5 Mesh – 0.5ohm
• L15 Clapton Mesh – 0.15ohm

There are 5 colours to choose from: Black, Stainless Steel, Blue, Green and Red.

Kit Includes

• iJoy Captain Link Mod
• Captain Pod Tank
• 0.15ohm L15 Clapton Mesh coil (installed)
• 0.5ohm L5 mesh coil
• 18650 battery adaptor (battery not included)
• Type C USB Cable
• User manual

iJoy Captain Link Mod Specs

• Size: 97x40x30mm
• Battery: 1x 18650 or 21700 (not included)
• Display: 0.96in TFT screen
• Output: 5-100W (0-8V)
• User modes: VW, TC, TCR
• Type C USB charging – 1.5A (or 1A – both are mentioned!) charge rate
• Resistance range: 0.05-3ohm
• Temperature range: 300-600°F
• Material: Zinc Alloy, Silicone, PCTG
• UNIV 2.0 Chipset

iJoy Captain Pod Specs

• Size: 25x49mm
• Capacity: 5ml (standard) / 2ml (TPD)
• Coil: L coil range – L5 0.5ohm Mesh / L15 0.15ohm Clapton Mesh
• 510 adaptor included
• Adjustable bottom airflow
• Bottom fill port

This is a stunning looking kit and with the 510 adaptor this has all the functionality of a box mod coupled with the ease of use of a pod kit!

Let me know your thoughts on the iJoy Captain Link in the comments below!

The post iJoy Captain Link Preview – Pod Simplicity With Box Mod Versatility! appeared first on Ecigclick.

And yes I can hear you sigh from here, it is another pod kit. Let’s have a closer look to see if there is anything unusual or exciting about this one!

What To Expect From The iJoy Aria Pro Kit

This is a pretty simple kit which I believe is targeted to starter vapers.

For a start the pods have fixed coils, meaning you do not get your hands dirty faffing with coil changes, you simply discard the entire pod and replace with a new one.

The pods are also transparent in order to see the e-liquid level, but it looks like they are tinted and most of the pod is obscured by the mod body anyway so I am not sure if this is a good feature or not!

There are 2 pod types – both are included in the kit:

• Aria 0.6ohm Opod (19-22W)
• Aria 1ohm Opod (11-13W)

The pods are refillable via the side fill port with up to 3ml of your own e-liquid.

Inside the main body of the device is the 900mAh battery which is rechargeable using the USB Type C cable at up to a 1A charge rate.

A 0.69 inch LED screen displays all of your data.

I am not sure if the wattage is adjustable or not. The specifications say this will output 5-25W but also mention “Auto Match” and there are no adjustment buttons that I can see?

So it may be that the mod recognises the pod installed and automatically sets the correct output? This needs clarifying on your website iJoy!

I do think the styling is pretty stunning on all versions! Even better are the Black Dragon and Rainbow Phoenix models which feature rivet studs on the one edge.

There are 5 colours to choose from: Cyan, Black & White, Camo, Black Dragon and Rainbow Phoenix.

Kit Includes

• iJoy Aria Pro mod
• Aria 1ohm Opod
• Aria 0.6ohm Opod
• USB Type C Cable
• User Manual

iJoy Aria Pro Kit Specs

• Size: 88.3x15x22.6mm
• Output: 5-25W
• Battery: 900mAh (internal)
• Display: 0.69in screen
• E-liquid capacity: 3ml (standard)
• Type C USB charging – 1A charge rate
• Pods: fixed coil refillable pods
• Coil options: 0.6ohm, 1ohm
• Side refill port

The iJoy Aria Pro Kit is a really basic starter pod kit but with some beautiful design features. A lack of clarity on the iJoy website is a bit of a problem so I do hope they update it with more information.

Tell me your thoughts on this riveting pod kit in the comments below!

The post iJoy Aria Pro Kit Preview – A “Riveting” New Pod Kit? appeared first on Ecigclick.

iJoy has predominantly used the Captain name on its larger, dual battery devices for which there have been plenty of variants.

Good timing too, as I’ve only just reviewed the iJoy Captain 2 kit for the #ecigclickfam.

Overall the iJoy Captain 2 kit was very good, a solid device which came with the Captain V Sub-Ohm Tank which performed very well.

The word ‘Captain’ is usually given to the leader of a sports team or is the person in command of a ship. So when the iJoy Captain 1500 Kit came through the post. I wondered why iJoy would stick such a powerful name on a low power pod mod?

What Can We Expect From the iJoy Captain 1500?

The iJoy Captain 1500 kit comes with a large capacity 5ml pod tank with a bottom-fill function and also bottom fitted coils.

The device itself is powered by a 1500mAh internal battery and can fire up to 40 watts.

There is also a smart little airflow adjustment ring you attach to each coil which means you can make use of the 0.7Ω Coil for a tighter MTL draw, or open it right up for a Direct To Lung vape with the 0.3Ω Mesh coil.

So let’s crack on with the review and see what this kit is all about.

This kit was sent to me free of charge for the purpose of review.

All views and opinions are solely those of my own and do not necessarily reflect the opinion of others.

Inside the Box

• 1 x Captain 1500 Device
• 1 x Captain 1500 Pod
• 1 x C15 Coil 0.3Ω Mesh
• 1 x C15D Coil 0.7Ω Round
• 1 x USB Type-C Cable
• 1 x Manual
• 1 x Warranty Card

Specs and Features

• Size: 99.0×27.0x23.0mm
• Battery: 1500mAh Built-In
• E-Liquid Capacity: 5ml (TPD Version 2.0ml)
• Output Wattage: 5-40w
• Airflow – Airflow ring on base of coil
• Charging: Via USB-C Port
• Available colours: Red | Green | Black | Gunmetal | Blue

Design and Build Quality

Standing only 99mm tall, the iJoy Captain 1500 is a cute wee system which is made up of a combination of tough feeling plastic and a leather surround on the rear of the device.

The leather section isn’t cushioned quite as well as some other devices, along with their own Captain 2 mod, but with the contrasting stitching on the leather, it looks fairly smart.

The Captain 1500 Pods

The kit comes with just the one pod which houses a Push-Fit Coil.

If you get your hands on the Non-TPD variant, you can squeeze a decent 5ml of e-liquid in the pod, of course the TPD version will be limited to 2ml.

The pod clicks nice and smoothly into the device thanks to 2 small notches on either side.

No magnets are present on the pod, or inside the device but a small notch system, but it works quite well.

The mouthpiece is non removable but is the usual 510 Drip-Tip Style, it’s nothing flash or fancy but straight and functional. Its a little on the tall side but that hasn’t really bothered me.

The pod is also clear, meaning its very easy to see your e-liquid level without having to remove it, or point a torch over it.

Captain 1500 Pod Mod In the Hand

The iJoy Captain 1500 is a really small system considering it houses a 1500mAh battery, a 5ml Pod Tank and 40 watts of power.

I can only really compare it to the Smok RPM40 which in comparison is pretty much shares the same dimensions but feels a lot more lightweight but a little more comfortable thanks to the curved leather back.

I mean, if you’re going to copy a pod mod. The OG Smok RPM40 isn’t a bad idea, but pod mods have moved on a bit since the RPM40 which was one of the game-changers, and one of the first in this category.

Regardless of how you use this device, finger or thumb firing I doubt even the smallest hands will have much trouble.

This is a teeny tiny device which will barely take up any room in your pocket or purse, not to mention its extremely lightweight, so top marks for portability.

However, being so lightweight does make it feel a little cheap, especially when you compare it to the high build quality and strong structure of its bigger brother the Captain 2 Mod.

How To fit the Coils and  Fill the Captain 1500 Pod Mod

Here’s how to fill the pod with e-liquid:

• Remove the Pod from the Device
• Press in the Coil ensuring a tight fit and screw on the Airflow
• Open the small silicone gasket on the front side of the pod
• Fill with your desired e-liquid and re-fit the gasket
• Leave the e-liquid to soak the coil for 5 minutes
• Re-fit the Pod to the device and enjoy.

Captain 1500 Pod Mod Display Functions

One nice feature with the iJoy Captain 1500 kit, which is slowly becoming the norm, is the smart functions from the device which means regardless of which coil you install, the device will automatically set the wattage to the recommended amount – which makes life a little easier for new vapers.

Understanding wattage and airflow when you first start vaping appears to be a lot harder to understand than I thought.

However, being a sparky, I kind of figured it out from the start.

But I hear a lot of people having trouble with setting the wattage at a maximum, and the airflow at a minimum on a 1.2 Ohm coil and then wondering why their vape tastes like Death. So a dummy proof Chip-Set is a godsend.

The 0.96in TFT colour display on the Captain 1500 is clear and fairly large considering the size of the device, but perhaps a little dim, especially when outside. But generally I haven’t had a problem with the screen and changing settings.

The settings on this device couldn’t be simpler. The iJoy Captain 1500 is a wattage only device with only a few options which can be altered by using a combination of button sequences using the fire, up and down buttons.

iJoy Captain 1500 Quick Start Guide

Here’s how to operate the iJoy Captain 1500 Device:

• Device On/Off – 5 Clicks of Fire Button
• Lock/Unlock Device – Press & Hold Fire and PLUS Button
• Puff Reset – Press & Hold Fire and MINUS Button.

How Does the iJoy Captain 1500 Pod Mod Perform?

The iJoy Captain 1500 Kit comes with 2 coils.

The C15 0.3Ω Mesh coil is clearly designed for a Direct-Lung draw so for that coil I used my favourite Code Red by Darkstar which is a 80VG/20PG e-liquid and possibly too thick for these small coils…we shall see!

And for the 0.7Ω C15D coil I went for a 50VG/50PG Just Juice – Blood Orange, Citrus and Guava Nic Salt to be used more as a Mouth-To-Lung style.

Captain 1500 Pod Mod – Flavour and Clouds

Seeing as the iJoy Captain 1500 comes with these two contrasting coils as well as the adjustable airflow ring, I had every expectation that the Captain 1500 could deliver a Direct Lung Draw, and a tight Mouth-To-Lung draw depending on which coil is used, wattage setting and airflow setting.

And it can!

Captain 1500 Pod Mod- the 0.3Ω C15 Mesh Coil

Recommended between 30-40 watts, the C15 Mesh coil performed best for me at 35 watts with the airflow ring set to its most open setting.

This coil performs really well for such a small coil and even with the high VG e-liquid, it had no problem keeping up with saturation.

The flavour from this coil is more than acceptable and delivers a slightly warm, saturated vape at 35 watts and a very respectable cloud as well.

Captain 1500 Pod Mod – the 0.7Ω C15D Coil

Recommended between 15 and 25 watts.

I have spent a lot of my time with this coil as a Mouth-To-Lung coil, with the airflow set at basically as closed as possible.

At 18 watts you get a warm vape ,sneaky cloud and fair flavour, not mouth filling but it does a fair job.

However, this coil actually does a decent job as performing as a Direct Lung coil, opening the airflow all the way up and leaving the wattage at 18 watts you can enjoy better flavour and a restrictive Direct Lung Draw.

The restriction is just right as well, yes you have to work a little bit for the vape but its not a strain on your lungs.

A perfect restrictive Direct-Lung draw and a nice amount of vapour.

iJoy Captain 1500 Airflow

Thanks to the airflow ring which attaches to the coils, the iJoy Captain 1500 Kit does offer more diversity and means you can tailor your vape to how you like it.

It works very well and as much as its a little bit of a pain as you have to remove the pod, to adjust the airflow.

Once its set, its really not a big deal.

With regards to noise, turbulence and whistle, the iJoy Captain 1500 kit is n bother whatsoever.

It’s certainly not noisy or turbulent but smooth and offers a nice restriction if you so wish.

iJoy Captain 1500 Battery Life & Charging

Seeing as the iJoy Captain 1500 Kit really can be used as a fairly powerful Direct Lung Pocket rocket and a discreet Mouth-To Lung stealth vape, its only fair to consider that your choice in vaping style will make a huge difference to battery life.

Considering the size of this device, I’m impressed they have squeezed a 1500mAh battery in there and although when vaping at 30-40 watts, you will drain the battery quite quickly, it still lasts a fair while.

When used as a Mouth-To-Lung system with the wattage around 20 watts, the device copes a lot better and has lasted me a full day most of the time.

Located at the base of the device is a USB Type-C port for charging, and although I cannot find anywhere official what the maximum charge time is, I did find one website state 1.5A Max.

Regardless, it’s usually charged within 40-50 minutes. So even if you get caught short whilst out and about, its easy enough to give the device a little boost when needed.

I’m not a fan of USB Ports being located at the base as this means laying the device down for a duration of time which may allow e-liquid to escape easier than if it was standing upright.

Does the iJoy Captain 1500 Pod Mod Leak?

Looking at the fact the iJoy Captain 1500 has bottom-fitted Push-Fit coils along with a filling port near the bottom of the pod, I have not had one leak and barely any condensation inside the top of the device.

If you’re planning on not using the device for more than a few days, I still strongly recommend you remove the pod from the device or make sure there is very little e-liquid within the pod.

Pros

• Decent Pod Capacity (Non TPD)
• Lightweight & Portable
• Average Flavour
• Airflow adjustment makes the device very diverse
• Quick charge and decent capacity

Cons

• Feels cheap in the hand
• Battery diminishes when used at higher wattage
• USB-C Port on the base

Final Review Verdict

As the pod mod battle for domination continues and continues and continues forever, I feel the iJoy Captain 1500 Kit fits somewhere in the middle of the pack.

Its one main feature that makes it stand out, is that it doesn’t stand out!

For such a small device it packs a fair punch and has all the simplicity of use and portability that people who use these kind of devices is looking for.

Would this device be long lasting and still work 3, 6 or even 12 months from now?

I’m not quite sure where to put this device on the durability scale, it really will come down to how much you take care of it.

The device is so small and lightweight that I can well imagine it sat on my lap when I forget to take hold of it when standing and it crashes onto a tiled floor.

I doubt it will take many drops before damage starts to appear.

Also the 1500mAh battery is a fair size, but it will slowly pack in over a few months and isn’t replaceable.

Does this device deliver the flavour, vapour and general experience I require, in order to be enjoyed?

As much as the iJoy Captain 1500 isn’t the best when it comes to flavour and vapour, its definitely not terrible and has certainly been enough for me.

I know this because sometimes when testing products, I also take a device I like with me as well as the product being tested.

But with the iJoy Captain 1500 I never took a second device with me as the Captain 1500 has satisfied me enough day to day…

Its just not the best that’s all…

Is this device versatile to suit a new vaper, and an experienced one a like?

With these kind of devices, I ALWAYS want to see portability, simplicity and durability.

The iJoy Captain 1500 is super portable thanks to its small size and light weight, super simple to use and operate with its clear display and although filling the tank means removing it from the device, its still easy to do.

When it comes to durability I feel its a little on the weak side and I have my concerns long-term, especially if like me, you are a clumsy sod.

However, this kind of system isn’t designed to be thrown around but to be sat on a desk quietly charging and to be nestled in your front pocket when walking the dog.

Have you bought the iJoy Captain 1500 kit?

Or have you given it a try?

Let me know your thoughts in the comments below.

The post iJoy Captain 1500 Kit Review – Can iJoy Shiver Me Timbers? appeared first on Ecigclick.

Let’s have a closer look at what this little beauty has to offer!

More Details On The iJoy Aria Kit

This looks like a basic tiny pod mod kit – but don’t let its appearance fool you!

For instance there is a 900mAh internal battery which is charged via the USB Type C port at a 1A charging rate.

You also have 3 power output options to choose from:

• Low = 3.4V
• Medium = 3.5V
• High = 3.6V

There are LED indicators on the side of the device – but I am not sure what these display? The website mentions a red LED light when the battery power is too low and also LED indications for fault conditions. It doesn’t specify if the output power level is shown on the indicators?

Controlling the device is the UNIV.Mini chipset – the smaller version of the Univ chip used in large iJoy mods such as the Captain 1500 kit, Captain 2 Kit and Shogun Mod.

The pod is a fixed coil type meaning no messy coil changes, simply discard the pod when the coil needs replacing and install a new pod.

There are 2 pod options and both are included in the kit:

• Aria 1ohm pod
• Aria Mesh 0.6ohm pod

The pod is refillable via the side fill port and will hold up to 3ml of your own e-liquid.

There are 4 colours to choose from: Black, Cyan, Black & White and Camo.

Kit Includes

• iJoy Aria mod
• 1ohm Pod
• 0.6ohm mesh pod
• USB Type C Cable
• User manual

iJoy Aria Kit Specs

• Size: 53.3x15x57.5mm
• Output: 22W max
• Battery: 900mAh (internal)
• Modes: 3 voltage settings – 3.4V/3.5V/3.6V
• Display: LED indicators
• E-liquid capacity: 3ml
• Pods: Refillable, fixed coil
• Side pod fill port
• Type C USB – 1A charge rate

This is a sweet looking device and I like these small simple pod kits, the Voopoo Drag Nano is still in my collection!

What are your thoughts on the iJoy Aria Kit? Let me know in the comments below!

The post iJoy Aria Kit Preview – Hitting The Right Note? appeared first on Ecigclick.

The styling is more like a traditional box mod and tank set-up but with the ease of use of a pod kit.

More Details On The iJoy PikGo Starter Kit…

So as this is classed as a starter kit it needs to be particularly user friendly.

There are 2 main components to the kit – the mod which provides the power and the pod where the e-liquid lives.

The mod component has a 1300mAh internal battery which is charged via the USB Type C port at a 1A charge rate.

There are 3 output settings to choose from:

• Low = 3.3V
• Medium = 3.5V
• High = 3.7V

The power level selected is displayed by the corresponding LED indicator on the side of the mod.

Like the recent Aria kit this has the UNIV.MINI chipset as the brains of the device.

Included in the kit are 2 pods – these are refillable but the coil is fixed – meaning no messy coil changes – simply discard the pod.

There is a 0.6ohm mesh coil pod and a 1ohm mesh coil pod to choose from. The pods are designed to cater to MTL (mouth to lung) and DTL (Direct to lung) vapers. We explain these terms in our Guide To Vaping Styles.

You can adjust the airflow via the slide switch on the rear of the mod.

Refilling is taken care of by removing the top cap to expose the fill ports.

There are 4 colours to choose from: Black, Stainless Steel, Green and Blue.

Kit Includes

• iJoy PikGo mod
• P0.6ohm mesh pod
• P1ohm Mesh pod
• Type C USB Cable
• User manual

iJoy PikGo Starter Kit Mod Specs

• Size: 70x27x21mm
• Output: 23W (max) – 3.7V (high) / 3.5V (medium) / 3.3V (low)
• Modes: 3 power level settings
• Battery: 1300mAh (internal)
• Display: LED indicators
• Type C USB – 1A charging rate
• Adjustable airflow
• Univ.Mini chipset

iJoy PikGo iJoy PikGo Starter Kit Pod Specs

• Size: 18×39.5mm
• E-liquid capacity: 2ml
• Top fill
• Pods: refillable, fixed coil

Decent starter kits always have a place in the vape market and this has plenty of functions whilst still being simple to use.

What do you think of the iJoy PikGo Starter Kit? Let me know in the comments below!

The post iJoy PikGo Starter Kit Preview – Pik Me – Pik Me! appeared first on Ecigclick.

From a first glance to me this seems like the Uwell Koko pod but with more features!

Let’s have a closer look at what to expect!

What To Expect From The iJoy Neptune X Kit?

The iJoy Neptune X Kit is a tiny square shaped pod mod which has an internal 650mAh battery.

Charging is via a USB Type C connection but the actual charging rate or time is not stated.

One of the features which does make this kit stand out a bit is the fact there is power adjustment.

There are 3 power levels to choose from:

• High = 3.7V
• Middle = 3.6V
• Low = 3.5V

Controlling the battery part of the device is the latest UNIV chipset which is a scaled down version of the chip used on the larger iJoy mods such as the Shogun Univ mod.

The styling of the device follows the original Neptune pod principles with an almost holographic composite side panel material.

Being so small this kit is ideal to wear around your neck using the lanyard included in the kit.

The pod just pushes into the battery section – I am not sure if the pods are compatible with the standard Neptune kit. For instance the image below of the pods is used on the iJoy website for both the Neptune and Neptune X kits.

The pod specs are the same for both devices too both being 1ohm resistance and 1.8ml in capacity.

There are 5 colours to choose from: Cross Black, Cross Red, Cross Green, Cross Blue and Cross White.

Kit Includes

• iJoy Neptune X Device
• 2 x1ohm Pods (1 installed)
• USB Type C cable
• Chain necklace
• User manual

iJoy Neptune X Kit Specs

• Size: 50x14x58mm
• Output: 3 power levels (3.5V, 3.6V, 3.7V)
• Battery: 650mAh (internal)
• Display: LED indicator
• E-liquid capacity: 1.8ml
• Pods: Refillable, fixed coil
• Coil options: 1ohm
• Top fill
• USB Type C charging

Again another pod mod kit but at least this is cute with some useful features.

Let me know what you think of the iJoy Neptune X Kit in the comments below!

The post iJoy Neptune X Kit Preview – Smoking “eX-it” Strategy? appeared first on Ecigclick.

As mentioned above the main difference is the battery arrangement but the pod and coils are compatible with the removable battery version.

What To Expect From The iJoy Jupiter 3000 Kit?

So this is a pod mod style kit featuring the device and a removable pod.

The pod is refillable via the bottom fill port and you can replace the coils without discarding the pod.

The coils used are the same as the original Jupiter kit and come in J1 (0.2ohm Mesh) and J2 (0.6ohm Mesh) versions. Both are included in the kit.

Also there is an optional RBA coil you can use to make the running costs even cheaper.

Inside the device part is an internal 3000 mAh capacity battery which can be charged at a 1.5A rate via the Micro USB port.

The mod will output 5 to 70W using a variable wattage output.

A 0.96in TFT screen displays all your adjustments and vaping data.

There are 7 colours to choose from: Black, Gunmetal, Red, Blue, Green, Orange and Purple.

Kit Includes

• iJoy Jupiter 3000 device
• Jupiter pod
• 0.2ohm mesh coil (installed)
• 0.6ohm mesh coil
• USB cable
• User manual

iJoy Jupiter 3000 Kit Specs

• Size: 112x30x25.5mm
• Output: 5-70W, VW
• Battery: 3000mAh (internal)
• Display: 0.96in TFT screen
• E-liquid capacity: 5ml
• Pods: Refillable, replaceable coil
• Coil options: J coil range (compatible with Jupiter kit)
• 1.5A charging – Micro USB
• Material: Aluminium, Zinc Alloy and Leather

Sorry the images and information is a bit sparse on this kit at present as it is not showing on the official iJoy website just yet.

Let me know what you think of the iJoy Jupiter 3000 kit in the comments below!

The post iJoy Jupiter 3000 Kit Preview – 3000mAh Internal Battery Version! appeared first on Ecigclick.